HDMIX - Firmware [v1.1.3]

How to view the version number of your currently installed HDMIX FirmWare:

1. On the HDMIX, press the UTILITY button.
2. Then, press UPDATES. The version number of the currently installed FirmWare will be displayed on the screen.

How to update your HDMIX to the latest FirmWare:

1. Download the FirmWare update and the latest release of Librarian to your computer using the links below.
   
   HDMIX FirmWare Update v1.13
   HDMIX Librarian v1.50
   
   These two downloads are packaged into zip archives. You must extract (or unzip) the enclosed files from the zip.
2. Copy the HDMIX_v1_13.upg file to the top level of a FAT formatted USB storage device. You should erase any earlier .upg files from the device. Take care to copy the .upg file and not the .zip!
3. With the HDMIX powered off, connect the USB device to any USB port.
4. Remove any other connected storage devices.
5. With the DC power jack connected, press and hold the power button until you see the message Waiting for Media on screen.
   
   This will take about four seconds, after which you can release the power button. If the unit does not display this message switch off and try again, taking care not to release the power button too early.
6. After a few seconds, provided HDMIX is able to locate the upgrade file, the message Any key updates to version... will be displayed. The version of the FirmWare upgrade is indicated.
7. Press one of the player buttons, for example one of the menu buttons.
8. The FirmWare upgrade will be loaded, a process which can take up to about a minute. After several seconds a progress indicator will be shown to give you an idea of the work remaining.
9. Once the update procedure has completed a message will confirm successful loading. Select OK and the unit will switch off.
10. If you haven't already done so, install Librarian v1.50 to your PC or Mac. Select the appropriate installer from the Librarian folder:
    
    NumarkLibrarian_v1_50_Mac.dmg   — for Macintosh NumarkLibrarian_v1_50_PC.exe — for Windows
11. Run the Librarian program and rebuild the libraries on your music devices.

How to disable Demo Mode:

Demo mode, designed to help introduce you to using the HDMIX, is enabled by default. It is It will automatically begin after two minutes if you do not touch the controls.

Once you are done with Demo Mode, we recommend that you deactivate it to avoid unintentional activation during a gig.

To deactivate Demo Mode, follow these steps:

1. On the HDMIX, press the UTILITY button.
2. Press > at the bottom-right corner of the screen.
3. Press Demo (under the screen).
4. Rotate the Push Select knob counter clockwise to change the setting for Start Demonstration to Never.

To return to Demo Mode later, you can follow these same steps, selecting an option other than Never for the Start Demonstration setting.