Numark DJ2GO2 Touch - Frequently Asked Questions

The Numark DJ2GO2 Touch is a portable, pocket-sized Serato DJ Lite (Serato DJ upgrade ready) controller equipped with a built-in sound card that can go with you everywhere and capacitive touch jog wheels for scratching and mixing. It's ideal for small gigs, prepping your gigs, and a great backup for those “just in case” moments. This guide will answer popular questions about the features and functionality of the Numark DJ2GO2 Touch.

 

Frequently Asked Questions

 

What is included in the box?

When you first open the box, you will receive:

 

What are the differences between the Numark DJ2GO2 Touch and the original Numark DJ2GO2?

The primary differences between the DJ2GO2 Touch and the original DJ2GO2 are that the DJ2GO2 Touch has capacitive touch jog wheels for scratching and finer control while mixing and includes a two-month subscription to the SoundSwitch lighting software (requires supported DMX interface).

[Back to Top]

 

What DJ software comes with the Numark DJ2GO2 Touch?

The Numark DJ2GO2 Touch includes a download for the Serato DJ Lite software and a two-month subscription to the Soundswitch lighting software (requires supported DMX interface).

[Back to Top]

 

Where can I download the free Serato DJ Lite software?

Upon registering the product you will receive a link to download the free software Serato DJ Lite in your Numark account.

You can also download the software directly from the Serato website.

[Back to Top]

 

Will the Numark DJ2GO2 Touch work with Serato DJ Pro?

Yes, the Numark DJ2GO2 Touch is compatible with Serato DJ Pro. Serato DJ Pro can be purchased separately from the Serato website

[Back to Top]

 

What can I do with the touch-capacitive platters?

The platters will adjust the playback position of the current song in one of two ways depending on the song’s status:

[Back to Top]

 

Can I adjust track pitch with the DJ2GO2 Touch?

Yes, the Numark DJ2GO2 Touch does have pitch control faders for both decks. You can set the pitch range inside the Serato DJ Lite software.

[Back to Top]

 

What are the different pad modes?

1. Cues: This pad mode button switches Buttons 1-4 to Hot Cues Mode.

2. Auto Loop: The pad mode button switches Buttons 1-4 to trigger loops (loop bar value is set in the software).

Manual Loop: The pad mode button switches Buttons 1-4 to manually control looping. In Manual Loop mode:

Sampler: The pad mode button switches Buttons 1-4 to trigger samples.

[Back to Top]

 

How do I power the Numark DJ2GO2 Touch?

The Numark DJ2GO2 Touch is USB bus-powered and does not require a separate power supply.

[Back to Top]

 

What USB cable is used for the Numark DJ2GO2 Touch?

The Numark DJ2GO2 Touch uses a USB mini-B cable.

[Back to Top]

 

Do I need to install any drivers for the Numark DJ2GO2 Touch?

The Numark DJ2GO2 Touch is fully class-compliant with Mac and Windows operating systems and does not require any additional driver installation.

[Back to Top]

 

Does the Numark DJ2GO2 Touch have an audio interface?

Yes, the Numark DJ2GO2 Touch has its own audio interface built-in for use with Serato DJ Lite (Serato DJ Pro upgrade ready).

[Back to Top]

 

What connection is the main output?

The Numark DJ2GO2 Touch main output is a 1/8” (3.5mm) output jack on the right side (same side as the USB port). There is a similar 1/8" (3.5mm) headphone jack on the left side.

[Back to Top]

 

Can I cue through my headphones while I'm playing music through the main outputs?

Yes, the Numark DJ2GO2 Touch has a 1/8” (3.5mm) headphone jack on the left side that allows you to cue the next song in your headphones while playing music through the main output.

[Back to Top]

 

Further Technical Support

Whether you are a customer or dealer, if you already own a Numark product, or if you just have pre-sales questions, the Numark technical support team is available to help! Visit the link below to connect with any of the following support options: online community support, phone support, email support.