RC-8 - Front Controls
RC-8 - Rear Connections
Rack-mount power conditioner.
Install the RC-8 in the top of your rack and use the eight
switched AC outlets on the rear panel to power all of your equipment,
up to a full 15-amp load. The line voltage monitor displays incoming
voltage, and the two slide-out, swiveling light fixtures provide
illumination of your gear, adjustable via the front-panel dimmer
control.
The RC-8 supports 8 grounded AC jacks on its rear panel, activated via a large lit power switch on the front panel. The RC-8 offers superb surge and transient suppression, so all power outputs are clean and noise-free.
The unit features a large front-panel LED display that shows current AC line voltage for informed power management. Also on the front panel, the RC-8 contains two pull-out light bars that have their own separate on/off switch and dimmer-control knob.
The RC-8 supports 8 grounded AC jacks on its rear panel, activated via a large lit power switch on the front panel. The RC-8 offers superb surge and transient suppression, so all power outputs are clean and noise-free.
The unit features a large front-panel LED display that shows current AC line voltage for informed power management. Also on the front panel, the RC-8 contains two pull-out light bars that have their own separate on/off switch and dimmer-control knob.
VOLTAGE METER & POWER CONDITIONER
OUTLETS
PULL-OUT RACK LIGHTS
- The RC-8 protects your delicate electronic equipment with a highvoltage surge and transient suppressor and an RFI/EMI interference filter. The fast-acting suppression circuit responds in less than a nanosecond, clamping transient voltages to safe levels. The filter works to prevent noise from fluorescent lights, certain dimmers, radio transmitters, and similar sources of “electronic pollution” from entering the AC line, and, from there, leaking into sensitive audio, video, or computer circuits.
OUTLETS
- The RC-8 has eight AC outlets located on its rear panel, controlled by a front panel master switch which glows when the power is on. The circuit breaker-protected outlets are rated at 15 amps, which is equivalent to 1800 watts at 120 volts.
PULL-OUT RACK LIGHTS
- The RC-8's lamps are easy to pull out and aim. A switch on the left side of the front panel turns them on and off, and the brightness is adjusted by the nearby dimmer control.
- Affordable, compact power module with extra features like LED voltage meter and light modules
- The RC-8 is the perfect power hub for any equipment rack.
Provides clean AC power
- Conditions power
- Surge and transient suppression
- 8 grounded jacks
Front-panel LED voltage meter
- Bright, clear display
- Informed power management
Two pull-out light bars
- Lights up entire rack
- Separate on/off switch
- Dimmer control knob
Rack-mountable
- Fits in any 19" rack
- Only takes up one rack space
Weight and Dimensions
- Weight: 5.0 lbs. (2.2 kg)
- Dimensions (H x W x D): 44mm x 480mm x 200mm
Disclaimer:
The features and specifications of the Numark RC-8 is subject to change at any time without notice.
Show All
No FAQs at this time.
Please check Key Features and Tech Specs for more information on this product.
