This product has been discontinued.

Serious DJ simplicity.

Omni Control contains everything you need to plug into any sound system and perform. This high-quality, heavyweight, rugged DJ device is not only a hardware controller for performing with the included Native Instruments Traktor LE and MixMeister Fusion Live software; it also houses a professional digital-audio interface to feed your headphones and the sound system.

This complete professional computer-DJ package consists of a hardware controller with built-in audio interface and two software titles: Native Instruments Traktor LE and MixMeister Fusion Live. Firm, reliable knobs, faders, and buttons are high quality, delivering solid and precision performance. An extremely clean, built-in 24-bit professional high-quality computer audio interface feeds pristine audio signal to two stereo outputs and your headphones. Ultra–low latency 44.1kHz and 88.2kHz audio ASIO drivers deliver solid sound. You can even plug in a microphone and talk over your mix.

Omni Control comes with Native Instruments Traktor LE software, which is based on Traktor Pro. It gives you four optional layouts, including cover art. You will enjoy new Beatgrid Editing and saving with locked sync for precise performance. New in Traktor LE is manual looping and selectable loop length for flexible loop integration. Additionally, Traktor LE gives you a choice of effects per deck including filter, delay, reverb and flanger. Omni Control comes factory mapped for use with Traktor Pro or LE for out-of-the-box performance. It's compatible with Mac and PC, and works with nearly any audio format. MixMeister Fusion Live is the DJ software for performers who want to perfect the production of their performances. Because Omni Control supports MIDI over USB, it is the ultimate choice for controlling your favorite MIDI-mappable software.

Omni Control has a heavyweight, sturdy feel thanks to its high-quality controls and rugged metal housing. It'll stay in place even when your fast-scratch technique gets aggressive. Carry less and do more with Omni Control.

FEATURES

  • Complete professional computer-DJ package
  • Hardware controller with built-in audio outputs (dual stereo RCA)
  • Mapped for TRAKTOR PRO
  • Heavyweight, sturdy feel in a steel housing
  • Extremely clean, high-quality sound card
  • Firm, reliable knobs, faders, and buttons
  • Supports MIDI over USB

INCLUDES

  • OMNI CONTROL Control Surface
  • Traktor LE Software CD
  • MixMeister Fusion Live Software CD
  • USB Cable
  • Quickstart Guide
  • Inputs

    • Mic: 1/4" TS
  • Outputs

    • Master: RCA stereo pair
    • Cue: RCA stereo pair
    • +2dBU
    • Headphones: 1/4" TRS
    • Signal-to-Noise Ratio: > 97dB (max output; JIS-A Weighted)
    • Frequency Response: ±1dB (20Hz – 20kHz)
  • Physical

    • Weight: 7 lbs.
    • Dimensions: 12.5" (W) x 10 5/8" (D) x 2.5" (H)
  • The Omni Control isn't lighting up when connected to my computer. Is something wrong?
    • NOTE: the OMNI CONTROL will not light up when connected to the computer. This is normal. The LEDs will only be able light up once the correct drivers are installed and the included Traktor LE software is completely and properly configured. The software must tell the LEDs to light
  • What kinds of software can be used with Omni Control?
    • OMNI CONTROL is a MIDI-compliant device and can be used with any kind of software that supports MIDI protocol. We've included two kinds
  • Will using Omni Control change how I need to configure my audio or connections?
    • OMNI CONTROL connects to your computer via USB, so all you need is one free USB2.0 port. Your audio connections can remain as you like them, but OMNI CONTROL also has two sets of RCA connections (on its rear panel), so you have the option of routing your master and cue mixes to remote speaker or amp systems (you will have to configure these outputs in your software
  • Can I use Omni Control through a USB1.1 port?
    • You can connect OMNI CONTROL to a USB1.1 port, but you will only be able to send audio to its master mix output. To take advantage of both master and cue mix outputs, OMNI CONTROL must be plugged into a USB2.0.
  • Can I plug Omni Control into a USB hub?
    • You can use OMNI CONTROL with a USB hub if it is a powered hub. If your hub is not powered, you can power OMNI CONTROL with a 6V 1A power adapter (not included).
  • Are there any special drivers or software to install?
    • You will have to install the necessary drivers, which is as easy as inserting the included software CD and following the on-screen instructions. If you don't already have a DJ software program, you can install Native Instruments' Traktor 3 LE and/or MixMeister Fusion Live, which are both included on the software CD.

MINIMUM SYSTEM REQUIREMENTS

  • Windows

    • Windows 7 (32-bit or 64-bit)
    • Windows Vista (SP1, 32-bit or 64-bit)
    • XP (SP3, 32-bit or 64-bit)
    • Pentium IV or Athlon 1.4 GHz or higher or higher
    • 1 GB RAM or higher
    • Available USB 2.0 port for both Master and Cue output support or an available USB 1.1 port for Master output support only
  • Macintosh

    • OSX 10.5/10.6
    • Intel Core Duo processor or higher
    • 1 GB RAM or higher
    • Available USB 2.0 port for both Master and Cue output support
    • Available USB 1.1 port for Master output support only