Virtual DJ 8 - Setup with a Numark DJ Controller

numark virtualdj8 mainSetting up a Numark DJ controller in Virtual DJ 8 may look intimidating but it’s a pretty easy task.  In fact, Virtual DJ 8 should automatically detect and setup your Numark controller for you. The guide below walks through making sure that you're Numark controller is set up properly for use with Virtual DJ 8. 

 

  1. Connect your Numark DJ controller via USB to your computer.
     
  2. Open your Virtual DJ 8 software and enter you login information if prompted. 
     
  3. If this is the first time you've started Virtual DJ 8 while your Numark controller is connected, you will see a dialog box similar to the one below:


     
  4. Click Use Soundcard and then OK

Virtual DJ should now automatically map to your controller and apply the correct audio settings. You should be all set, but it's always a good idea to check the Setup menu and confirm that the correct settings have been applied. 

  1. Click the SETUP button in the software. 

    numark virtualdj8 setupbutton
     
  2. Click on the Audio tab. Your audio routing should look similar to the picture below except with your controller's name in place of Mixtrack Pro II. 



    PLEASE NOTE: The Numark Mixdeck, Mixdeck Quad, and Mixdeck Express will use EXTERNAL MIXER instead of SPEAKER + HEADPHONE


     
  3. Click on the Controllers tab and make sure your controller is selected. You should see something similar to the image below, except with your controller's name in place of Numark Mixtrack Pro II. 

              

That's it! Enjoy using Virtual DJ 8 with your Numark DJ controller. 

Further Technical Support

Whether you are a customer or dealer, if you already own an Numark product, or if you just have pre-sales questions, the Numark technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.