Numark iDJ3 - Setup and Configuration in Virtual DJ

numark idj3 virtualdj setup mainOne of Numark's most popular DJ controllers is the iDJ3. When this unit was originally released it used hardware drivers. Units manufactured after 10/2010 are class compliant and do not require drivers at all. In this guide we will cover the setup of both versions in Virtual DJ.

There should be a date of manufacture on the bottom of your unit. It if was produced before 10/2010 follow the guide below to correctly configure your device with Virtual DJ. 

 

Pre 2010

PC Setup

Go to CONFIG -> Sound Setup and configure your sound setting as follows:

Click Apply.

 

MAC Setup

Go to CONFIG -> Sound Setup and configure your sound setting as follows:

Click Apply.

 

Post 2010

If your unit was produced after 10/2010 follow this guide for both MAC and PC.

Go to CONFIG -> Sound Setup and configure your sound setting as follows:

Click Apply.


Once you have properly configured your unit, plug a pair of amplified speakers into the master RCA output on the back and your headphones into the headphone socket and enjoy!
 

Also See...

 

Numark Support & Warranty Service

Whether you are a customer or dealer, if you already own a Numark product, or if you just have pre-sales questions, the Numark technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.