Numark Mixdeck Express - Setup with Virtual DJ Pro and Numark Cue

numark mixdeckexpress mainWith more and more DJ’s moving from CD and Vinyl formats to software and software-based controllers, popularity is growing for products such as the Numark Mixdeck Express.  This guide walks through the proper set up for the Numark Mixdeck Express with Virtual DJ Pro and Numark Cue.

 

  1. Connect the Mixdeck Express to the computer.  Set the Source button to MIDI PC on both sides.
     

  2. Open Virtual DJ/ CUE.

    numark cue

  3. Click on the Config menu in the upper right hand side of the software.

    numark  cue config
     

  4. Chose the Mappers tab in the Config menu and choose Mixdeck Express from the drop-down menu.

    numark cue mappers

  5. Next, click on the Sound Setup tab and adjust the settings as follows:

    • INPUTS > NONE
    • OUTPUTS> EXTERNAL MIXER (In the drop down box choose: DECK ONE FRONT OUTPUT/DECK TWO REAR OUTPUT)
    • SOUNDCARD > 4.1 CARD (In the drop down box next to sound card you choose: the MIXDECK EXPRESS)

 

Then click Apply and OK and you are now ready to go!

numark cue sound set up

 

Numark Technical Support & Warranty Service

Whether you are a customer or dealer, if you already own an Akai Pro product, or if you just have pre-sales questions, the Akai Pro technical support team is available to help!

Visit the link below to connect with any of the following support options: online community support, phone support, email support.